Lighting Maintenance & Repair
Outdoor Lighting Repair & Service Across Chicagoland
When Your Lighting Goes Dark, We Bring It Back
A great outdoor lighting system is supposed to be the kind of thing you forget about, in the best way. It just works. Then one night a whole zone is out, or a fixture is aimed at the sky after the landscapers came through, or half the yard is flickering and you have no idea why. Suddenly the thing that made your home look incredible every evening is making it look neglected.
That’s where we come in. Accents Lighting repairs and maintains outdoor lighting systems all over the Chicagoland area, and here’s the part that matters most: we don’t only fix our own installs. If another company put your system in, or if it came with the house and you’ve never met whoever built it, we can still help. We track down the problem, fix it right, and get your home glowing again.
The Problems We See Most Often
Outdoor lighting takes a beating in this part of the country. Freeze and thaw, road salt, spring landscaping crews, curious dogs, and a decade of Chicago weather all add up. These are the calls we get all the time:
- Whole sections gone dark, usually a cut wire, a bad connection, or a failed run rather than the fixtures themselves
- A single fixture out or flickering, often a corroded socket, a tired bulb, or water that found its way inside
- Fixtures knocked loose, tilted, or aimed the wrong way after mowing, snow removal, or plantings shifted
- A transformer that hums, trips, or quit entirely, which is almost always the real culprit when everything goes dark at once
- Timers and photocells that no longer keep the right schedule, so your lights come on at noon or never at all
- Foggy, yellowed, or cracked lenses and sun-faded fixtures that make good light look tired
Our Maintenance Service Keeps It From Getting There
Most repair calls could have been a quick tune-up six months earlier. A little attention goes a long way, and our maintenance visits are built to catch the small stuff before it becomes the dark-yard stuff:
- We clean lenses and fixtures so you get back the brightness that dirt and hard water quietly stole
- We re-aim everything that drifted, so the design looks the way it was meant to again
- We check connections, swap failing bulbs and drivers, and test the transformer and controls end to end
That’s the whole idea. Small, regular care instead of one big emergency.
We'll Work On It No Matter Who Installed It
What Might Be Going On
| What You’re Seeing | Likely Cause | What We Do About It |
|---|---|---|
| A whole zone is dark | Cut wire, loose connection, or a failed transformer | Trace the run, repair the break, test the transformer |
| One light flickers or dies | Corroded socket, spent bulb, or moisture inside | Replace the part, reseal the fixture, confirm the fix |
| Lights aim the wrong way | Mowing, snowplows, or shifting soil and plantings | Reset, re-stake, and re-aim to the original design |
| Wrong on-off times | A failing timer, controller, or photocell | Reprogram or replace the control and set your schedule |
| Everything looks dim | Dirty lenses, voltage drop, or aging bulbs | Clean, rebalance the load, and swap what’s worn out |
Absolutely, and it's a big part of what we do. You don't need to know the brand, the age, or who built it. Bring us the problem and we'll figure out the rest. Plenty of our repair clients became long-term maintenance clients exactly this way.
No. We mount the track cleanly along the fascia or under the shingle edge using proper methods, not staples through your roof. Done by a professional crew, the install protects your roofline and your gutters far better than clipping strands on and ripping them off every year does.
It depends entirely on what's wrong, and we'd never guess blind. A simple fixture swap is minor. A traced-down wiring fault is more involved. We diagnose first, explain what we found in plain language, and give you a clear price before any work happens.
Built for exactly this. The fixtures are weather-sealed and rated for freeze, thaw, wind, snow, and UV, and quality LED systems are rated well past 50,000 hours. We install for our climate, so a brutal January is a non-issue.
Why Choose Accents Lighting
Our approach eliminates guesswork, carefully mapping out every beam, angle, and effect before work starts on site.
We believe transparency and careful planning make for the best results. By walking you through each phase of your project before installation begins, we ensure your outdoor lighting plan fits your style, budget, and property layout. Explore our step-by-step approach below:
We meet at your property to walk the space, discuss your goals, and identify key architectural and landscape features to highlight.
Our team designs a precise lighting plan, selecting fixture locations, angles, and beam spreads to achieve your ideal evening ambiance.
We perform a clean, non-disruptive installation, then return after dark to adjust every light for optimal balance and visual impact.
